lf there is a need and please send us an email or call.
google-site-verification=80O6XBy03bsFbKOkA9FPf621c6cQDtpoAlal0K1QyRQ google-site-verification=tS07iw8vBOnm5rzSNcvDZK0P0xionOuN7pUgLWTMd0c
Application This production line is applicable for 3.6 mm copper to be drawn out 0.8-1.6 mm wire.
1.Application of Drum type insulated laying up machine This equipment is suitable for large cross-section and large length power cables stranding, and can be used for stranding pre-back twisting or non-pre-back twisting cable core laying up, with ad...
1.Application Machine is suitable for 16-50mm2 copper wire,Aluminum wire stranding, BVR multi cores at 25mm2
Feature · PLC control system · New improved design · Cradle type · HMI touch screen · High rotating speed · Electrical Bobbin Elevator · New machine frame design for better noise and vibration control · Carbon fiber flyers · Stable tension control...
1.Introduction In the production of wires and cables, the packaging process typically involves coiling and binding. Traditionally, this was done using a simple rewinding machine followed by manual wrapping. However, this method relied heavily on manu...
1.Introduction This production line adopts continuous casting and rolling process to produce φ8mm oxygen-free bright copper rods, and the raw material is electrolytic copper. This production line consists of a 16 tons/hour molten copper vertical furn...
This equipment is suitable for extrusion of Teflon ultra-fine core wire, Teflon ultra-fine high frequency data core wire and physics foaming extrusion of coaxial wire
Usage:Applied for new energy charging power station cable,household appliance,electricity, metallurgy,chemical engineering etc. movable electrical devices,JBQ etc insulation extrusion.
Usage: Apply to various core wires of communication cables, data cables, coaxial cables, and audio/video cables extrusion Such as HDMI, DP, CAT5E, DVI, CATV, ATA, RG, SYWV, and JIS series of physical foaming production or solid extrusion. To achieve double-layer or triple-layer co-extruded extrusion.
It can be widely used in aerospace, aviation, metallurgy, petrochemical, ship, building materials, heat, gas, etc. Applicable media: gas, water, oil, and some corrosive liquid. Often used with gasoline and that special extreme applications purpose. Maintains flexibility through full temp range. Available with a variety of chafe guards
Product description The MX-21M Micro Drawing Machine is a high-performance device designed specifically for processing ultra-fine metal wires such as gold, silver, copper, and stainless steel. With advanced four-tower independent servo control syste...
Product description The MX-15M Micro Drawing Machine is a high-performance device designed specifically for processing ultra-fine metal wires such as gold, silver, copper, and stainless steel. With advanced four-tower independent servo control syste...
This production line is equipped with industry-leading technology and techniques, and is specialized in the manufacture of high-precision network cables from Category 5e to Category 8. It includes key equipment such as: Wire drawing / Solid Insulat...
This production line is equipped with industry-leading technology and techniques, and is specialized in the manufacture of high-precision network cables from Category 5e to Category 8. It includes key equipment such as: Wire drawing / Solid Insulat...
High-speed insulation series production lines are used to produce high-performance cables
This equipment is suitable for extrusion of vulcanization to produce sheaths for silicone rubber cables
This is suitable for extrusion of fluorine plastics such as FEP (polyfluoroethylene propylene , F46),PFA, ETFE(F40)
This equipment is suitable for extrusion of Teflon high frequency wire and coaxial wire.
This equipment is suitable for extrusion of Teflon ultra-fine core wire, Teflon ultra-fine high frequency data core wire and coaxial wire
Suitable for aerospace, stationary phase cables, electrical appliances, telecommunications equipment and instrumentation wire multilayer precision around the package.
This line is designed for the production of core of voltage class 6~35kV, the insulation thickness is below of 12mm, power cables with cross-linking polyethylene (XLPE) insulation, which it uses Nitrogen for curing and water for cooling.
Application: The cross-linking production line with voltage levels of 35 kV and below is production equipment used to produce cross-linked polyethylene (XLPE) insulated power cables. The production line is mainly composed of extruders, cross-linked v...
Application It is a high speed laser diameter gauge. It can measure wire diameter, ellipticity, concave and convex points. Measuring range: 0.5~30mm Features ·Non-contact multi-axis laser diffraction measurement principle for high accuracy ·Ultra-sh...
Application This equipment adopts the new four-wheel continuous casting machine and continuous casting and rolling process to produce conductive round aluminum rods, the diameter of the rods produced is Φ15, Φ12, Φ9.5 mm three specifications, the pro...
1.Application Mainly used for cat5~cat8 data cables, and various types of foamed high-frequency special cables. It can suitable for skin-foaming-skin and color strip constructure. Characterized by high speed, high precision, and high production capac...
Application 500P Pair Twist Bunncher is for twisting the copper wires of LAN(LOCAL AREA NETWORK)cable, (CAT5 、CAT6 、CAT7 and CAT8 )Local Area Network Machine back twist in pairing process for Mhz Data Communication Local Area Network(LAN)Cable(CAT5 、...
Application SAM T series wire bunching machines are mainly used for stranding and cable lay off of power cables, electronic cables, telephone cables, lancables, computer cables, with different types of payoffs to achieve a variety of purposes, with s...
Application the copper wire insulation coating, then the wire get cooling through water to finished products. The product can be power cable, automotive wire, communication cable, magnetic wire, LAN cable and so on. It's used for 您的浏览器不支持 video 标签。...
Usage: Suitable for various communication cables, data cables, coaxial cables, RF CABLE, RG, JIS, DVI, HDMI, DP, etc. foaming core wire extrusion.
Suitable for Teflon high temperature resistance wires(Fluorine plastic such as FEP,FPA,ETEF),Micro-fine coaxial cable,USB3.1(coaxial structure type),tube and various thin-skin multiplayer insulation cables extrusion,the core wire of Lan cables and date cables extruding or sheath extrusion.
Feature: 1.compact design 2. Loading and unloading with compressed air spool lifting table 3.Hydraulic disc brake 4.Travers speed control by inverter 5.Double spool lock structure 您的浏览器不支持 video 标签。
Advantages ●forexcellent quality coiled packages and higher payout speeds ● variable wire traverse (rosette pattern laying)guarantees optimum wire positioning and trouble-free downstream processing even after long hauls ● easy connection to all makes...
Advantage: For the production of Fine wires wthannealer made of Non-Ferrous metals or Non-Ferous alloys
Feacher 1. fully automatic spool change for continuous production operation 2. maintenance-free three-phase AC drives 3. different sizes of spools can be used 您的浏览器不支持 video 标签。
Advantaces 1.DC resistance annealer in single wire design. 2.3-zone annealing system,electrically neutral (no current flow to other machines). 3.ergonomic and user-friendly machine design,with easy maintenance. left and right-hand versions for Non Fe...
Advantages: DC resistance annealer for Non Ferrous wires with the highest quality requirements digjital annealing votage control for consistent wire quality. 2-zone annealing system,electrically neutral (no current flow to other machines),ergonomic a...
Advantage 1. Transmitted by high-quality flat belts, low noise. 2. Double converter drive, constant tension control,Wire diameter stabler,energy-saving 3. Traverse by ball screw.
Advantage 1. compact design for fast installation and for space-saving use oftheproduction area 2. Large capacity wire coil design, can loading more wire, Reduce down in spool time 3. Hydraulic disc brake, make brake more firm 4. Button operate loading and unloading bobbin
Application The machine is mainly used for twisting of 7 strands cable with 6+1 structure , suitable for control cable, aluminum stranded, copper stranded etc. The appearance of the unit has been designed by professionals, and the production process ...
1.Application of Rigid Frame Stranding Machine This machine is mainly used for stranding copper and aluminum wires. It is suitable for the production of large-length bare aluminum, bare copper wire, steel core aluminum stranded wire and aluminum al...
Application: The machine is used for drawing Φ9.5 aluminum or al-alloy rod and Φ12 aluminum rod, complete with continuous annealing, coiled by dual spooler or single spooler. 您的浏览器不支持 video 标签。
Application This machine is mainly used for drawing and annealing 1.2-4.5mm copper wire from 8mm The drawing drums are arranged in-line, and each drawing drum is driven by an independent servo motor, which is greatly convenient for operation and can...
1.Advantages : (1)Compact design for space saving use of the production area (2)Helically geared precision gearing for extremely smooth operation and uniform load transmission and low noise simultaneous production of multiwire at same diameter tolera...
Application This line is mainly used for the production of solder wire Adopting microcomputer PLC control, the operation can be through the touch screen (human-computer interface) to set and modify the requirements of the product process parameters, ...
Product description: LCD digital display tensile tester (double columns) is used for rubber, plastics, textiles, wires and cables, composite materials, leathers, waterproof materials, non-woven fabrics, geotextiles, paper and other non-metallic materials and metal wires, metal foils, sheet metal and metal rods and other metal materials for tension, compression
Application The upward continuous casting production line is used to produce the long and bright oxygen-free copper rod and copper tube.
1.Application This equipment adopts multiple motor independent transmission. It is suitable for the cable formation of the insulated core wires of control cables, signal cables, computer cables, etc. It can also be used for the stranding of steel cor...
Application This machine is applicable to bunching of various kind of cables such as power cable, communication cable, computer and instrument cable, copper conductor, aluminum conductor, BV, BVV, RV and RVV, etc.
Application 1.Th e machine is suitable for strand ing and lay-up various sizes of 35-300mm² and various specifications of 3, 4, and 5 cores. 2.This is mainly used for power cables, i nsulated cores , which can be round or sector .
Application It is suitable for the twisting and synchronous winding of insulated core wires such as USB cable, electrical cable, communication cable and data cable etc. This single twisting machine is widely used in various types of wires and c...
Application This machine is mainly used for drawing and annealing φ1.1-φ4.5mm copper wire.
Product description: As the development of high-rise buildings, the improvement of the fire-prevention level and the safety awareness of citizens, the medium voltage fire resistant wires
Product Description: Double-end grinding machine is used to grind the rubber, plastic, and the other similar sample to a certain thickness for the test of another testing device, with the advantages of both precision grinding wheel and fine grinding wheel working at the same time
Product description: Computer-controlled electronic tensile tester (large deformation) is widely used for hardware, metal, rubber and plastics, footwear, leather, clothing, textiles, insulators, wires, cables
Product description: Wire rod (copper wire) elongation tester is used to test the elongation of copper wires, aluminum wires, aluminum magnesium alloy wires, iron wires, and other wires.
Product Description: LCD digital display tensile tester (double columns) is used for rubber, plastics, textiles, wires, and cable
Product description: Dumbbell die sample cutter is used to cut rubber, insulation and sheath materials, make them to be standard-shaped sample for test. Allocated with various dumbbell cutter dies for different test requirements
Product description: Optical image measuring instrument is applicable to all fields based two coordinates, widely used in machinery, electronics, instrumentations, plastics and other industries. Features: zoom lens combined with cross line generator ...
SAM 62026 Automatic AC High Voltage Withstand Tester
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and a...
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and a...
Description: • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and alkali resist...
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and a...
Description Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and alka...
D escription Brand:WITFLON Product origin:Shenzhen,China Delivery time:30 Days Supply capacity:10Ton/Day Features: Features: Low and high temperature resistance Corrosion resistance Wear resistance Insulation resistance Acid and alkali resistance Low...
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and a...
D escription: • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and ...
D escription: • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and ...
D escription: • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and ...
D escription • Brand:WITFLON • Product origin:Hubei,China • Delivery time:3~7 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and alk...
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and a...
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and ...
D escription •Size:1.6*3.2mm • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resista...
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and a...
D escription • Brand:WITFLON • Product origin:Shenzhen,China • Delivery time:30 Days • Supply capacity:10Ton/Day Features: • Features: • Low and high temperature resistance • Corrosion resistance • Wear resistance • Insulation resistance • Acid and ...
It can be widely used in aerospace, aviation, metallurgy, petrochemical, ship, building materials, heat, gas, etc. Applicable media: gas, water, oil, and some corrosive liquid. Often used with gasoline and that special purpose
It can be widely used in aerospace, aviation, metallurgy, petrochemical, ship, building materials, heat, gas, etc. Applicable media: gas, water, oil, and some corrosive liquid. Often use with gasoline and those special extreme applications purpose. Maintains flexibility through full temp range. Available with a variety of chafe guards
It can be widely used in aerospace, aviation, metallurgy, petrochemical, ship, building materials, heat, gas, etc. Applicable media: gas, water, oil, and some corrosive liquid. Often used with gasoline and those special
It can be widely used in aerospace, aviation, metallurgy, petrochemical, ship, building materials, heat, gas, etc. Applicable media: gas, water, oil, and some corrosive liquid. Often use with gasoline and those special
It can be widely used in aerospace, aviation, metallurgy, petrochemical, ship, building materials, heat, gas, etc. Applicable media: gas, water, oil, and some corrosive liquid. Often used with gasoline and that special purpose
Automatic Bobbins Turned Machine-Ground Type
Application It is suitable for turnover operations with high labor intensity such as cables copper wiers molds and paper making, and is a good helper for saving time and effort to stop loss. 您的浏览器不支持 video 标签。
Mounting connectors
Connectors for energy storage systems
Advantages Innovative quick-connect technology for easier field wiring Easy wiring as no special tools are required for assembly TÜV-tested components for long-term reliable connections Flexibility thanks to a wide range of cable diameters Stable con...
SAM Electric offers a wide range of design models of metric circular connectors for industrial automation applications: including different sizes, straight or elbow, pre-fabricated or field assembled. The diverse product portfolio provides the ideal ...
Application Heavy complete series industrial connectors are suitable for harsh environments, reliably protect interfaces and ensure reliable power, data and signal transmission. Industrial connectors are dustproof, waterproof, vibration-resistant an...
Application: The line is mainly used for the production of PTFE insulated cables
SAM-BTTZ Mineral Insulated Cable Production Line
this is PTFE tube production line
Application High Speed Mixing machine for PTFE or Carbon powder High Speed Automatic Mixing machine for Filled PTFE Filled PTFE automatic mixing machine with high speed mainly include mixing pot, mixing blade, momentum driving device, machine base and electricity cabinet.
The forming machine is one of the main equipment for producing Teflon tubes. It is a production equipment specially designed to produce Teflon tubes. This forming machine will push the blanks required for Teflon tubes. This equipment uses a single cylinder lift, which can be synchronized and fine-tuned. The structure of the whole machine is compact.
Application Teflon is a thermoplastic material, which can be used for sintering. With the development of science and technology and the progress of the times, the traditional process needs to be continuously improved to meet the development of modern...
The Pushing machine is one of the equipment for producing PTFE tube. This machine will pressurize the PTFE type billet which is pressed out by the pre-pressing machine. The higher density PTFE tube is again pressurized and heated out. The machine is provided for pre-pressing the blank body feeding device. The whole machine has a reasonable structure, compact and practical operation and convenient operation.
TPU ultra-thin-walled tube
Packaging protection tube
The inner PTFE outer 8-chamber PEBAX middle layer 304 braid mesh
Product Details Balloon feed tube: PEBAX/PA feed tube The balloon cover was PTFE/FEP/PE Packing coil: HDPE Tube body: PEBAX/PA main tube
Application This production line is applicable for 2.6-3.0 mm copper to be drawn out 0.4-1.2 mm wire.
Application: The technological process of UV Irradiation Cable Crosslinking Equipment is to use UV light as the radiation source, mix the mixed photocrosslinking polyolefin ingredients and plastic coating on the conductive wire core, and then immediately enter the special irradiation equipment for molten optical crosslinking. The photo-crosslinked polyolefin insulated wire and cable can be obtained by cooling the insulated wire core at different temperatures and other subsequent processing. UV irradiation cable crosslinking equipment only needs to make a little change in the original ordinary extrusion line, put the traction, irradiation box, and electrical control cabinet, which covers a small area, can meet the use requirements, the production of UV radiation cross-linking polytene wire and cable products.
Application: This production line is used for producing PVC, PE, LSHF (Low-smoke halogen free) cable insulation layer or sheathing layer.
Application This equipment is applicable for extruding cable divider (cross filler) which is used for network cable production.
Application This equipment is applicable for lan cable winding in 8 figures. Every coil is 305m long and packed in box. The cable is easy to pull out in the packing way. The blank hole in the coil can be adjustable on PLC.
Application This equipment is suitable for outer surface extrusion of wires and cables with insulation materials such as PVC/PE/LSZH . It's also a typical model for sheath extrusion for USB and lan cable .
Application It is used in twisting and taping for high-frequency wire, signal wire, CAT6, CAT6A U/UTP, F/UTP, U/FTP,S/FTP etc
Application suitable for the pair twist of CAT6, CAT6a, CTA7 or computer core wire.
Application It is used in twisting and taping for high-frequency wire, signal wire, CAT6, CAT6A U/UTP, F/UTP,U/FTP, S/FTP, etc
Application Suitable for LAN CABLE CAT5,CAT5E,CAT6A,CAT7,CAT8 signal cable twisting Core wire specifications Best range:0.8mm~2.0mm Strand O.D. Best range:1.6mm~4.0mm
Application: HH-17 tandem line is apply to producing high end data cable such as CAT5E, CAT6, CAT6A etc.
Application It is used in network cable coiling at 305 meters/coil, the shape of the coiled wire will be like a word 8.
Equipment application The equipment is mainly used for chemical foam wire extrusion ,which the material is FMPE
Application It used in wire insulation extrusion precedure
Introduction : This page is to help those who want to produce optic fiber cable and choose suitable equipment. Including structure and process in indoor and outdoor optic fiber cable as much as possible.
Application It is a type of wiring in which two conductors of a single circuit are twisted together to improve electromagnetic compatibility.
Application be suitable for SZ stranding optical-fiber cable, and used for the production of the SZ stranding optical-fiber cable of optical-fiber tube outside diameter Φ1.0-Φ3.5mm.
Application Mainly used for extruding the loose tube covering the fiber cores (usually 12 cores). Tube material can be PP or PBT.
Application: This equipment is mainly used for the extrusion of the inner and outer sheath of the optical cable.
Application Mainly used for SM, MM fiber full chromatography coloring,which is convenient for identification of multiple fibers in the beam tube. At the same time the device can also be used in fiber rewinding segments.
Application 1.The machine is horizontal double-layer wrapping machine(paper tape, aluminum foil)with rotation plate wrapping on the core wire,own single wrapping head. 2.Mainly uses for the electric wire, the strength cable, controls cable and optical cable etc.insulated wire core mica tape wrapping, the fireproof electric wire, 3.mainly is suitable for power plant, airport, ships, high rise construction, subway, underground street and recreation area.
Application The equipment is mainly used for chemical foam wire extrusion, it has skin-foam and skin foam skin.
This equipment is suitable for outer surface extrusion of wires and cables with insulation materials such as PVC/PE.
Application 1.The machine is vertical single-layer wrapping machine(paper tape,aluminum foil)with rotation plate wrapping on the core wire,own single wrapping head. 2.Mainly uses for the electric wire, the strength cable, controls cable and optical cable etc.insulated wire ,USB cable etc with mica tape,Mylar tape
Application 1.The machine is vertical double-layer wrapping machine(paper tape, aluminum foil)with rotation plate wrapping on the core wire,own single wrapping head. 2.Mainly uses for the USB cable,electric wire, the strength cable, controls cable and optical cable etc,insulated wire core mica tape wrapping, the fireproof electric wire electric cable 3.mainly is suitable for power plant, airport, ships, high rise construction, subway, underground street and recreation area. 4.It’s sold well at India,Pakistan,UZ ,turkey
apply to wire and cable surface tape at single and 2 layer,material is suitable at aluminum foil tape, cotton paper tape, transparent tape,mica tape etc
1. Product Description: Power frequency spark machine is actually an online weakness detection instrument. It periodically loads the set voltage value to the insulated wire according to a certain rule, and the conductor part is grounded. In this way,...
1.It is vertical single-layer wrapping machine(paper tape,aluminum foil)with rotation plate wrapping on the core wire,own single wrapping head. 2.Mainly uses for the electric wire, the strength cable, controls cable and optical cable etc. 3.insulated wire core mica tape wrapping, the fireproof electric wire electric cable mainly is suitable for power plant, airport, ships, high rise construction, subway, underground street and recreation area .
1. Product Description: Power frequency spark machine is actually an online weakness detection instrument. It periodically loads the set voltage value to the insulated wire according to a certain rule, and the conductor part is grounded. In this way,...
1.Pay off type : upper beam type portal pay off 2.Bobbin:Φ1200--Φ2500mm 3.Bobbin width:950mm-1900mm 4.Loading weight:12T 5.Cable diameterLΦ10-70mm 6.Traveling motor:BWED121-35×17-1.5kw(AC) 7.Lifting motor:BLD11-23-1.5kw(AC 2 sets) 8.Clamp motor:Y90L-...
Application SAM-3021 Dynamic Diameter Gauge is used mainly for online diameter measurement and control for electric wire and cable, optic fiber cable, tubes and wires. Compared with the previous generation products, the third generation gauge is char...
1. Application: Cable extrusion machine UV Irradiation Cable Crosslinking Equipment
Application: This series machine are mianly for braiding.communication cable,signal cable,USB cable,high temperature wire,insulation wire, iron wire, and special cable,rice cooker power cable,conduction band,shielded cable,control cable,shielding lay...
Applications: This machine use for copper braided cable, tinned copper braided cable coiling process
Application: This machine is use for wire transfer and coiling to the spindle/coils . it is hot selling to India, Russia market. it has differ types according to your conductor wire size
Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure and heat of hot aluminum ...
Application It is suitable for the shielding or braiding of all kinds of high quality electric wire,computer wire ,network cable etc .
SAM Cable extrusion dies Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure...
SAM Cable extrusion dies Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure...
1. cable insulation method types
Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure and heat of hot aluminum ...
Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure and heat of hot aluminum ...
This machine automatically completes automatic feeding, threading, cutting, feeding, threading small brackets, threading plug, crimping, and threading in one time. One machine can perfectly replace 4-6 skilled workers and save riveting workers. Stable and efficient, one-time investment, several months of payback, permanent benefits.
Product description: Specimen slicing machine is in line with IEC 60811, which is allocated to complete the hot set test and tensile test to meet with the product quality standard requirement. It must be used with the sample cutter that equipped with...
Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure and heat of hot aluminum ...
SAM Cable extrusion dies Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure...
Application This equipment is suitable for outer surface extrusion of wires and cables with insulation materials such as PVC, XLPE
Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure and heat of hot aluminum ...
Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure and heat of hot aluminum ...
Introduction The extrusion die is essentially a thick circular steel disc containing one or more openings to produce the desired profile. They are usually made of H-13 die steel and are heat treated to withstand the pressure and heat of hot aluminum ...
This equipment is suitable for outer surface extrusion of wires and cables with insulation materials such as PVC,XLPE
How to order Please provide the following information: 1. Bore diameter in mm/inches and quantity required 2. Drawing to be provided by the customer 3. Material to be extruded (PVC, PE, rubber, etc…) 4. Material preferred in the tools (if not we ...
Application This is for cable extrusion machine, machine die is accessory of cable extrusion machine.
This machine is mainly used for stranding copper and aluminum wires with 1+6+12 structure.
Introduction TC Wire Drawing Dies (Tungsten Carbide Wire Drawing Dies) are widely used in applications that require high temperature, impact resistance and only short-term use. This is made possible by the low price of tungsten carbide dies. Because...
Introduction TC Wire Drawing Dies (Tungsten Carbide Wire Drawing Dies) are widely used in applications that require high temperature, impact resistance and only short-term use. This is made possible by the low price of tungsten carbide dies. Because...
The machine is mainly used for twisting of 7 strands cable with 6+1 structure , suitable for control cable, aluminum stranded, copper stranded etc. The appearance of the unit has been designed by professionals, and the production process has been upgraded, with atmospheric appearance, stable high-speed operation and low noise.
450/13 Bare aluminum rod breakdown machine is used to draw Φ9.5mm ordinary into Φ1.70mm-Φ4.5 mm wire.
Introduction ND dies are similar to SSCD and are an excellent option for manufacturing fine and ultra-fine wires. Natural diamond dies provide superior quality, hardness, accuracy and a long service life for each die. They yield precision wire with ...
Application: Wire drawing molds are widely used, such as electronic devices, radar, television, instruments and aerospace and other high-precision wire, as well as commonly used tungsten wire, molybdenum wire, stainless steel wire. Wire cable wire a...
Application: Synthetic Single crystal diamond (SSCD) is a kind of synthetic diamond with high purity,no impurity and high stability.These quality characteristics also make the material have high hardness and stable wear resistance. Synthetic single ...
Application: Polycrystalline Diamond Wire Drawing Dies are manufactured with polycrystalline diamonds, which are manufactured by mixing the selected diamond powder of specific grain size with metallic bonding material and sintered at high temperature...
Application of shape die: used for nonfeerous wire, including copper, aluminum, electromagnetic wire and stainless steel.
Application: used for nonfeerous wire, including copper, aluminum, electromagnetic wire and stainless steel.
Application: Polycrystalline Diamond Wire Drawing Dies are manufactured with polycrystalline diamonds, which are manufactured by mixing the selected diamond powder of specific grain size with metallic bonding material and sintered at high temperature...
Application: Polycrystalline Diamond Wire Drawing Dies are manufactured with polycrystalline diamonds, which are manufactured by mixing the selected diamond powder of specific grain size with metallic bonding material and sintered at high temperature...
Application 1.For wire production, sustainable use 2.Match wire drawing machine 3.Many models 4.Large loading and good dynamic balance 5.Custom special size
Application: For high cross section cable winding and packing.
Application: For high cross section cable winding and packing.
Application 1.For wire production, sustainable use 2.Match wire drawing machine 3.Many models 4.Large loading and good dynamic balance 5.Custom special size
Application 1.for wire production, sustainable use 2.match wire drawing machine 3.many models 4.large loading and good dynamic balance 5.custom special size
Application: For cable winding and packing
Application 1.For wire production, sustainable use 2.Match wire drawing machine 3.Many models 4.Large loading and good dynamic balance 5.Custom special size
Application: For cable winding and packing
Application 1.For wire production, sustainable use 2.Match wire drawing machine 3.Many models 4.Large loading and good dynamic balance 5.Custom special size
Application 1.For wire production, sustainable use 2.Match wire drawing machine 3.Many models 4.Large loading and good dynamic balance 5.Custom special size
1. Application: PP plastic spool for wire packing PA-757KABS engineering plastic. For high speed stranding, fiber, optical cable, communication cables...
Application: PP plastic spool for wire packing PA-757KABS engineering plastic. For high speed stranding, fiber, optical cable, communication cables
Application 1.For wire production, sustainable use 2.Match wire drawing machine 3.Many models 4.Large loading and good dynamic balance 5.Custom special size
Application: PP plastic spool for wire packing PA-757KABS engineering plastic. For high speed stranding, fiber, optical cable, communication cables
Application It is suitable for the pair twist of CAT6, CAT6a, CTA7, or computer core wire.
Application This production line is applicable for 3.6 mm copper to be drawn out 0.8-1.6 mm wire.
1.Application of Drum type insulated laying up machine This equipment is suitable for large cross-section and large length power cables stranding, and can be used for stranding pre-back twisting or non-pre-back twisting cable core laying up, with ad...
1.Application Machine is suitable for 16-50mm2 copper wire,Aluminum wire stranding, BVR multi cores at 25mm2
Feature · PLC control system · New improved design · Cradle type · HMI touch screen · High rotating speed · Electrical Bobbin Elevator · New machine frame design for better noise and vibration control · Carbon fiber flyers · Stable tension control...
1.Introduction In the production of wires and cables, the packaging process typically involves coiling and binding. Traditionally, this was done using a simple rewinding machine followed by manual wrapping. However, this method relied heavily on manu...
1.Introduction This production line adopts continuous casting and rolling process to produce φ8mm oxygen-free bright copper rods, and the raw material is electrolytic copper. This production line consists of a 16 tons/hour molten copper vertical furn...
This equipment is suitable for extrusion of Teflon ultra-fine core wire, Teflon ultra-fine high frequency data core wire and physics foaming extrusion of coaxial wire
Usage:Applied for new energy charging power station cable,household appliance,electricity, metallurgy,chemical engineering etc. movable electrical devices,JBQ etc insulation extrusion.
lf there is a need and please send us an email or call.